30/DISASSEMBLING ENGINE 67
Removing the balancer shaft
700029-10
ಥ Pull balancer shaft out of the bearing seats and remove it.
Removing the torque limiter
200120-11
ಥ Remove the screw with the washer. Take off torque limiter.
Removing the starter idler gear
200121-12
ಥ Remove the lock ring. Take off the washer. Take off starter idler gear.
Removing the kickstarter shaft
200110-10
ಥ Apply counterpressure to kickstarter spring. Remove screw.
ಥ Remove spring hanger
. Release tension on the kickstarter spring.
ಥ Turn kickstarter shaft
 counterclockwise and pull it out.
Removing the kickstarter idler gear
200120-12
ಥ Remove the lock ring. Take off the washer. Take off kickstarter idler gear.
To Next Page
Loading...
Need help?
General
