30/ASSEMBLING ENGINE 107
200084-10
ಥ Insert the special tool and firmly press it toward the piston.
ಥ Turn the special tool counterclockwise, thereby pressing the piston pin retainer into
the groove.
Insert for piston pin retainer (77329030100) ( P. 181)
200092-01
ಥ Remove the cloth. Keep the timing chain tensioned.
ಥ Push the cylinder down carefully and let the dowels engage.
Installing the cylinder head
200082-11
ಥ Check parts for damage and wear. Replace damaged or worn parts.
ಥ Mount the dowels. Fit the new cylinder head gasket.
ಥ Fit the cylinder head.
ಥ Insert the washers of the cylinder-head bolts.
ಥ Mount cylinder-head bolts
 and tighten all screws in a crisscross pattern.
Specification
Screw, cylinder head M10x1,25 Tightening
sequence:
Tighten di-
agonally, be-
ginning with
the rear screw
on the chain
shaft.
Step 1
10îš‘Nm
(7.38îš‘lbfîš‘ft)
Step 2
30îš‘Nm
(22.13îš‘lbfîš‘ft)
Step 3
50îš‘Nm
(36.88îš‘lbfîš‘ft)
Engine oil (any)
ಥ Mount and tighten screw
.
Specification
Screw, cylinder head M6 10îš‘Nm
(7.38îš‘lbfîš‘ft)
To Next Page
Loading...
Need help?
General
