STORAGE 19
105
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since
the engine cannot warm up properly, the water vapor
produced during combustion condenses and causes
valves and the exhaust system to rust.
19.2 Preparing for use after storage
401059-01
– Take the motorcycle off the front lifting gear. ( p. 47)
– Remove the rear of the motorcycle from the wheel stand.
( p. 47)
– Charge the 12-V battery. ( p. 79)
– Install the 12-V battery. ( p. 78)
– Set the clock. ( p. 21)
– Perform checks and maintenance measures when preparing for
use. ( p. 30)
– Take a test ride.
To Next Page
Loading...
Need help?
General
