EasyManuals Logo
Home>KTM>Motorcycle>690 SMC R EU 2021

KTM 690 SMC R EU 2021 User Manual

KTM 690 SMC R EU 2021
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
13 WHEELS, TIRES
76
13.7 Tubeless tire system
301978-10
This vehicle uses a tubeless tire system in which a rim seal
band
1
is used instead of the conventional tube.
The advantages of the tubeless system lie in the absence of dan-
ger from a faulty tube. This greatly reduces the risk of a sudden
loss in pressure.
The moments of inertia of these wheels are smaller than in con-
ventional spoked wheels with a tube. This results in better han-
dling and riding comfort.
The rigid rim design results in a wire spoke wheel that is almost
entirely maintenance-free.
KTM recommends that the rim seal band be changed after 5 years
at the latest, regardless of the actual state of wear.
13.8 Checking tire pressure
Info
Low tire pressure leads to abnormal wear and overheating of the tire.
Correct tire pressure ensures optimal riding comfort and maximum tire service life.
400695-01
Remove the protection cap.
Check the tire pressure when the tires are cold.
Tire pressure when solo
front 2.3 bar (33 psi)
rear 2.5 bar (36 psi)
Tire pressure with passenger / full payload
front 2.3 bar (33 psi)
rear 2.5 bar (36 psi)
» If the tire pressure does not meet specifications:
Correct the tire pressure.
Mount the protection cap.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 690 SMC R EU 2021 and is the answer not in the manual?

KTM 690 SMC R EU 2021 Specifications

General IconGeneral
BrandKTM
Model690 SMC R EU 2021
CategoryMotorcycle
LanguageEnglish

Related product manuals