Kubota SVL65-2 - 4. Turning the machine; 4.1 How to use pivot turn

(1) Left control lever (traveling
lever)
(A) Pull
(B)
Backward
NOTE :
• When
the machine begins to travel backward,
the reverse alarm starts sounding.
IMPORTANT :
• If the temperature of the hydraulic oil is too low,
the reverse alarm may start sounding when
switching from the backward to the forward
travel. This alarm is not a problem.
Just run for warm-up, and then the hydraulic oil
temperature rises, this will stop the alarm. If the
alarm still keeps sounding, contact your local
dealer.
4. Turning the machine
CAUTION
T
o avoid personal injury:
• Before changing direction of the the machine,
beware of people in the work area.
• Make sure that the bucket or attachment is
lowered on the ground.
4.1 How to use pivot turn
To turn the machine forward to the left
1. T
ilt the left-control-lever (traveling lever) forward to
the left.
(1) Left control lever (traveling
lever)
(A) Tilt
(B) Forward to the left
To turn machine backward to the left
1. T
ilt the left-control-lever (traveling lever) lever
backward to the left.
(1) Left control lever (traveling
lever)
(A) Tilt
(B)
Backward to the left
To turn machine forward to the right
1. T
ilt the left-control-lever (traveling lever) forward to
the right.
OPERATION OF THE MACHINE OPERATION
SVL65-2
59