Kubota SVL65-2 User Manual

(1) Right control lever (front op-
erating lever)
(A) Push
(B)
Lower
To raise the lift arms
1. Pull
the right-control-lever (front-operating-lever)
backward.
(1) Right control lever (front op-
erating lever)
(A) Pull
(B)
Raise
NOTE :
• T
o stop the lift arm operation, return the right-
control-lever (front-operating-lever) to the
neutral position.
5.1 How to use the lift arm stopper
WARNING
T
o avoid personal injury or death:
• Never work on a machine with the lift arms up
unless the lift arms are secured by an approved
lift-arm-stopper.
The lift-arm-stopper prevents the lift arms from falling
when servicing the machine.
Installing
1. Park
the machine on level and firm ground, and
lower the lift arms fully to the ground.
2. Remove the front attachment.
3. Stop the engine.
4. Ask the second person to remove the lift-arm-
stopper from the storage position.
(1) Lift arm stopper (2) Knob bolt
5. Start the engine.
6. Set the parking-brake-switch to the parking
position.
OPERATION OF THE MACHINE OPERATION
SVL65-2
61

Kubota SVL65-2 Specifications

General

Rated Operating Capacity	2, 100 lbs
Travel Speed	7.1 mph
Travel Speed, High	7.1 mph
Hydraulic System Flow	17.4 gpm
Lift Arm Breakout Force	6, 834 lbs (3, 100 kg)
Net Power	74 hp (55.2 kW)
Overall Length (with bucket)	157.5 in (4, 000 mm)
Height to Top of Cab	82 inches
Overall Length	157.5 in (4, 000 mm)
Overall Width	72 in (1, 830 mm)
Overall Height	82 inches