Kubota WSM F2880 User Manual

2-S20
F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
TRANSMISSION
(3) Separating Transmission Case
PTO Clutch Shaft Assembly
1. Remove the range gear shift lever (6).
2. Remove the PTO clutch shaft with hydraulic PTO clutch
assembly (5), 33T Gear (2) and 16T-33T gear, and remove the
RWD shaft 1 (3) with 34T gear (4).
(When reassembling)
• Insert the PTO brake disc into the stud bolt (1) as shown in the
figure.
W1047327
Separating Transmission Case
1. Remove the transmission case (1) from the differential gear case.
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or its equivalent) to joint
surface of transmission case (1).
IMPORTANT
■
• Be sure to tighten the transmission case mounting screws
and nut.
W1047514
(4) Separating Differential Gear Case
Hydraulic Cylinder Assembly
1. Remove the hydraulic cylinder assembly (1) from the differential
gear case.
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or its equivalent) to joint
surface of the differential gear case and hydraulic cylinder
assembly (1).
• Check the face of stopper plate (2) as shown in the figure.
W1047870
(1) Stud Bolt
(2) 33T Gear
(3) RWD Shaft 1
(4) 34T Gear
(5) Hydraulic PTO Clutch Assembly
(6) Range Gear Shift Lever
Tightening torque
Transmission case
mounting screw and nut
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
29.0 to 32.5 ft-lbs
(1) Transmission Case (2) Differential Gear Case
Tightening torque
Hydraulic cylinder
mounting screw and nut
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
29.0 to 32.5 ft-lbs
(1) Hydraulic Cylinder Assembly (2) Stopper Plate
KiSC issued 04, 2006 A

Kubota WSM F2880 Specifications

General

Brand	Kubota
Model	WSM F2880
Category	Lawn Mower
Language	English