6-S5
F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
STEERING
[2] PREPARATION
(1) Separating Power Steering Controller
Battery
CAUTION
• When disassembling the battery cables, disconnect the
negative cable from the battery first. When connecting,
connect the positive cable to the battery first.
1. Disconnect the negative cable (2) from the battery.
2. Disconnect the positive cable (1) from the battery.
Seat
1. Disconnect 2P connector from the seat switch.
2. Remove the seat (1) with the seat base.
W1040675
Panel
1. Separate the front panel (1) from the rear panel (4).
2. Disconnect the connectors from the easy checker, fuel gauge,
coolant temperature gauge and hour meter in front panel (1).
3. Disconnect the connectors (2), (3) from the main switch and head
light switch.
4. Remove the horn (5).
5. Remove the rear panel (4).
W1013706
(1) Positive Cable (2) Negative Cable
Tightening torque Seat base mounting screw
17.7 to 20.5 N·m
1.8 to 2.1 kgf·m
13.1 to 15.1 ft-lbs
(1) Seat (2) Seat Base Mounting Screw
(1) Front Panel
(2) 4P Connector
(3) 3P Connector
(4) Rear Panel
(5) Horn
To Next Page
Loading...
Need help?
General
