Kubota WSM F2880 User Manual

9-S12
F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
MOWER
5. CHECKING, DISASSEMBLING AND ASSEMBLING
[1] CHECKING AND ADJUSTING
Checking Front Gauge Wheel Tire Pressure
WARNING
• Never exceed the tire pressure shown below (maximum
limit) when attempting to seat the bead. If bead does not
seat by the time the pressure reaches maximum limit, deflate
the assembly reposition the tire on the rim, relubricate, and
reinflate. After seating the bead, adjust inflation pressure as
recommended in the inflation pressure chart.
1. The tire pressure naturally drops slowly in the course of time.
Thus, check it every day and inflate as necessary.
CAUTION
• Do not attempt to mount a tire unless qualified. Use proper
equipment.
W1018550
Maximum front gauge
wheel tire pressure
Factory spec.
343 kPa
3.5 kgf/cm
2
49.7 psi
Recommend front
gauge wheel tire
pressure
Factory spec.
196 kPa
2.0 kgf/cm
2
28.4 psi
KiSC issued 04, 2006 A

Kubota WSM F2880 Specifications

General

Brand	Kubota
Model	WSM F2880
Category	Lawn Mower
Language	English