5-S3
F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
REAR AXLE
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-8.)
W1016410
Item N·m kgf·m ft-lbs
Lock nut of rocking force adjusting screw 23.6 to 27.4 2.4 to 2.8 17.4 to 20.2
Slotted nut of drag link end 17.7 to 34.3 1.8 to 3.5 13.0 to 25.3
Rear axle bracket mounting screw and nut 124 to 147 12.6 to 15.0 91.1 to 108.4
Rear wheel mounting nut 81.8 9.0 65.1
Slotted nut of tie-end end 17.7 to 34.3 1.8 to 3.5 13.0 to 25.3
Bevel gear case mounting screw 48.1 to 55.8 4.9 to 5.7 35.5 to 41.2
Knuckle arm mounting screw M10 screw 39.3 to 64.7 4.0 to 6.6 29.0 to 47.7
Knuckle arm mounting screw M12 screw 80 to 110 8.2 to 11.2 59.1 to 81.1
Knuckle arm support mounting screw 23.6 to 27.4 2.4 to 2.8 17.4 to 20.2
Bevel support cover mounting screw 18.7 to 32.3 1.9 to 3.3 13.8 to 23.8
Axle flange mounting screw 44.2 to 63.7 4.5 to 6.5 32.6 to 47.0
To Next Page
Loading...
Need help?
General
