Kubota WSM F2880 User Manual

2-S27
F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
TRANSMISSION
(5) Differential Gear Case
Front Cover
1. Remove the front cover (1) with the PTO shaft (2) from the
differential gear case (3).
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or its equivalent) to joint
surface of the differential gear case (3) and front cover (1).
W1051118
Removing Differential
1. Remove the bearing holder mounting screws, and remove the
differential bearing holder (1).
2. Remove the differential assembly.
3. Remove the internal snap ring (5) from the differential gear case
right side.
(When reassembling)
• Install the differential assembly (3), noting the number of shims
(2), (4).
W1027403
Bearings
1. Remove the right and left bearings from the differential case.
NOTE
■
• Be careful to note location of all shims when disassembling.
Shims will need to be reinstalled in the location they came
from.
W1027669
Spiral Bevel Gear
1. Remove the spiral bevel gear UBS screws (1).
2. Remove the spiral bevel gear (2) from differential case (3).
(When reassembling)
• Apply liquid lock (Three Bond 1324 or its equivalent) to the spiral
bevel gear UBS screws.
W1027735
(1) Front Cover
(2) PTO Shaft
(3) Differential Gear Case
Tightening torque
Differential bearing holder
mounting screw
17.7 to 20.5 N·m
1.8 to 2.1 kgf·m
13.1 to 15.1 ft-lbs
(1) Differential Bearing Holder
(2) Shim
(3) Differential Assembly
(4) Shim
(5) Internal Snap Ring
(6) Differential Gear Case
Tightening torque
Spiral bevel gear UBS
screw
29.5 to 34.3 N·m
3.0 to 3.5 kgf·m
21.7 to 25.3 ft-lbs
(1) Spiral Bevel Gear UBS Screw
(2) Spiral Bevel Gear
(3) Differential Case
KiSC issued 04, 2006 A

Kubota WSM F2880 Specifications

General

Brand	Kubota
Model	WSM F2880
Category	Lawn Mower
Language	English