Kubota WSM L3560 User Manual

HYDRAULIC SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
8-S21
[4] LIFT ARM SUPPORT AND HYDRAULIC CYLINDER
(1) Separating Hydraulic Cylinder
Top Link, Lift Rod and PTO Cover
1. Remove the top link (1), lower links and PTO cover (3).
2. Disconnect the lift rods (2), (4) from lift arm.
(When reassembling)
9Y1210824HYS0026US0
Drawbar Frame and Hydraulic Cylinder
1. Remove the drawbar frame (3).
2. Remove the hydraulic cylinder pins.
3. Disconnect the hydraulic cylinder hoses (4) and return hoses
(5), then remove the hydraulic cylinders (1), (2).
(When reassembling)
• Apply grease to the hydraulic cylinder pins.
• Install the cylinder pin (lower) from right hand side.
9Y1210824HYS0027US0
Tightening torque
Lift arm pin mounting nut
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
Lift arm pin lock nut
63 to 72 N·m
6.4 to 7.4 kgf·m
47 to 53 lbf·ft
(1) Top Link
(2) Lift Rod R.H.
(3) PTO Cover
(4) Lift Rod L.H.
Tightening torque
Drawbar frame mounting
screw (M14)
167 to 196 N·m
17.0 to 20.0 kgf·m
123 to 144 lbf·ft
Drawbar frame mounting
screw (M12)
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
Hydraulic cylinder hose
retaining nut
35 to 48 N·m
3.5 to 4.9 kgf·m
26 to 35 lbf·ft
(1) Hydraulic Cylinder L.H.
(2) Hydraulic Cylinder R.H.
(3) Drawbar Frame
(4) Hydraulic Cylinder Hose
(5) Return Hose
KiSC issued 03, 2016 A

Kubota WSM L3560 Specifications

General

Brand	Kubota
Model	WSM L3560
Category	Tractor
Language	English