ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-S89
[13] CCV HEATER
(1) CCV Relay
Checking Connector Voltage
1. Measure the voltage with a voltmeter across the battery terminal
and chassis as table below.
2. If the voltage differs from the battery voltage, the wiring harness
or fuse is faulty.
9Y1210824ELS0166US0
Functional Check
• The relays described here are used same ones so that
these are interchangeable.
1. Apply battery voltage across the terminals c and d, and check
for continuity across the terminals a and b.
2. If continuity is not established across the terminals a and b,
replace it.
9Y1210824ELS0078US0
Voltage Terminal d – Chassis Approx. battery voltage
(1) CCV Relay (2) Connector (Wire Harness side)
(1) Connector (Relay) (2) Battery
To Next Page
Loading...
Need help?
General