TRANSMISSION
L3560, L4060, L4760, L5060, L5460, L6060, WSM
3-S96
(4) Regulating Valve
Front Grille, Skirt and Battery Cable
1. Open the bonnet (1) and disconnect the battery negative cable
(2).
2. Remove the skirt RH (4). and front grille (3).
9Y1210824TRS0079US0
Hydraulic Pipes and Regulating Valve Assembly
1. Disconnect the PTO (GST) delivery pipe (5), power steering
return hose (3) and power steering delivery pipe (4) from
regulating valve assembly (2).
2. Remove the delivery pipe (1).
3. Loosen and remove the regulating valve mounting screws.
4. Remove the regulating valve assembly (2) from the power
steering hydraulic pump (7).
(When reassembling)
• Install the copper washers firmly.
• Apply grease to the O-ring (6) and be careful not to damage it.
9Y1210824TRS0080US0
(1) Bonnet
(2) Battery Negative Cable
(3) Front Grille
(4) Skirt RH
Tightening torque
Joint bolt for PTO (GST)
delivery pipe (5) and
regulating valve
35 to 39 N·m
3.5 to 4.0 kgf·m
26 to 28 lbf·ft
Joint bolt for power steering
delivery pipe (4) and
regulating valve
40 to 49 N·m
4.0 to 5.0 kgf·m
29 to 36 lbf·ft
Joint bolt for delivery pipe
(1) and hydraulic pump
40 to 49 N·m
4.0 to 5.0 kgf·m
29 to 36 lbf·ft
Regulating valve mounting
screws
18 to 20 N·m
1.8 to 2.1 kgf·m
13 to 15 lbf·ft
(1) Delivery Pipe
(2) Regulating Valve Assembly
(3) Power Steering Return Hose
(4) Power Steering Delivery Pipe
(5) PTO (GST) Delivery Pipe
(6) O-ring
(7) Power Steering Hydraulic Pump
To Next Page
Loading...
Need help?
General