Kubota WSM L3560 User Manual

CABIN
L3560, L4060, L4760, L5060, L5460, L6060, WSM
10-S52
Heater Hoses
1. Remove the outer roof.
NOTE
• Before disconnecting the heater hoses (2), put the parting
marks on the hoses for marking proper reconnecting.
2. Disconnect the heater hoses (2) from the hose pipes (1).
3. Remove the inner covers (3).
4. Pull out the heater hoses (2) from the bottom of the cabin.
5. Remove the heater hoses (2).
(When reassembling)
• Connect the heater hoses at their original positions.
• In assembling the heater hose (2) to the pipe (1), connect the
heater hose with identification mark (white paint) to upper side
of the hose pipe.
• When connecting the heater hose with A/C unit, hose should be
put into the A/C unit pipe more than 30 mm (1.2 in.).
9Y1210824CAS0089US0
(1) Heater Pipe
(2) Heater Hose
(3) Inner Cover
KiSC issued 03, 2016 A

Kubota WSM L3560 Specifications

General

Type	Compact Utility Tractor
Engine Model	Kubota V1505-T
Horsepower	37 hp (27.6 kW)
Fuel Type	Diesel
Drive	4WD
Hydraulic System	Open center
3-Point Hitch	Category I
PTO Horsepower	30.5 hp (22.7 kW)
Transmission	Hydrostatic
Number of Gears	3-range
Height	91.3 in (232 cm)
Tire Size (Front)	7-16
Tire Size (Rear)	15-19.5
Displacement	91.4 cu. in. (1, 499 cc)