Document Box
6-16
Printing from a Job Box
When RAM Disk Mode is enabled, you can use a Job Box to print.
Job Box is a function that stores print data on the set RAM disk in the machine, enabling the data to be printed
as needed from the operation panel of the machine.
If an ID (4-digit number) is set when printing is executed from the computer, the data can be kept more
confidential. When an ID is set, the ID must be entered in order to print the stored data from the machine.
For the RAM disk settings, see RAM Disk Mode on page 8-63
.
Private Print
Private Print is used to allow printing only after the same 4-digit ID that was entered in the printer driver at the
time of printing is entered at the operation panel. The data is erased after printing.
For information on Private Print, see Help in the printer driver.
The procedure for printing stored data is explained below.
1
Press the
Document Box
key. The Document Box
menu appears.
2
Press the ļ² or ļ³ key to select [Job Box].
3
Press the
OK
key. The Job Box menu appears.
4
Press the ļ² or ļ³ key to select [Private Print].
5
Press the
OK
key. The user selection menu
appears.
6
Press the ļ² or ļ³ key to select the user.
To Next Page
Loading...
Need help?
General
