Copying Functions
4-14
Continuous Scan
When a large number of originals cannot be placed in the document processor at one time, the originals can be
scanned in separate batches and then copied as one job. With this function, originals are scanned until you
press [End Scan] (the
Right Select
key).
The procedure for making copies using Continuous Scan is explained below.
1
Press the
Copy
key.
2
Press the
Function Menu
key. Function Menu
appears.
3
Press the ļ² or ļ³ key to select [Continuous Scan].
4
Press the
OK
key. Continuous Scan appears.
5
Press the ļ² or ļ³ key to select [On] and then press
the
OK
key.
Completed. is displayed and the screen returns to
the basic screen for copying.
6
Place the originals in the document processor or
on the platen and press the
Start
key.
7
Place the next original and press the
Start
key.
Repeat these steps to scan the remaining
originals.
After scanning all originals, press [End Scan] (the
Right Select
key) to start copying.
To Next Page
Loading...
Need help?
General
