Kyocera ECOSYS M6026cdn Type B User Manual

Preparation before Use
2-39
2
Changing Device Information
Change the device information of the machine.
1 Access Command Center RX by referring to Accessing Command Center RX on page 2-37.
2 From the Device Settings menu, select System.
3 Enter the device information, and then click Submit.
IMPORTANT: After changing the setting, restart the network or turn the machine OFF and then ON. To restart
the network interface card, click Reset in the Management Settings menu, and then click Restart Network in
“Restart”.

Kyocera ECOSYS M6026cdn Type B Specifications

General

Brand	Kyocera
Model	ECOSYS M6026cdn Type B
Category	All in One Printer
Language	English