Kyocera ECOSYS M6026cdn Type B User Manual

Default Setting (System Menu)
8-208
NW InterfaceSend
The client function such as the network authentication and the reference of user information via LDAP operates
only by the selected interface. This function is mainly used for the network system administrator. For more
information about each function, refer to
Command Center RX User Guide .
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the
OK
key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the
Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [NW
InterfaceSend].
4 Press the OK key. The NW InterfaceSend screen
appears.
5 Press the  or  key to select the desired [NIC].
Standard: standard network interface
Option NIC: optional network interface kit
6 Press the OK key. The NIC is set and the Basic
menu reappears.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
NW InterfaceSend: a b
*********************
2 Option NIC
[ Exit ]
1 *Standard

Kyocera ECOSYS M6026cdn Type B Specifications

General

Brand	Kyocera
Model	ECOSYS M6026cdn Type B
Category	All in One Printer
Language	English