Kyocera FS-2100D User Manual

3-7
Printing
For more details on operation, refer to Op Functions (Optional application settings) on page 4-130.
Secure Pull Printing (Optional Feature)
Secure Pull Printing is a printing feature where a user pulls the print job to a printer selected after the job is spooled in a
server. To use this feature, the following system environments are required.
The Authentication server: KYOCERA Net Policy Manager (Optional Software) must be installed.
ID card and ID card reader: they are used to register and authenticate a user.
The Spooler server: it sends the print job to a selected printer after the user logs in.
For more details, contact your dealer or service representative.
6. The user pulls
the print job from
the selected printer.
5. The spooler
server sends the
print job to the
selected printer.
2. The spooler server
receives the print job.
1. A user sends
the print job to the
spooler server.
4. The Authentication
Server confirms the
login information
registered.
3. The user logins to the
printer or other MFP via
an Authentication Server
using an ID card.

Kyocera FS-2100D Specifications

General

Brand	Kyocera
Model	FS-2100D
Category	All in One Printer
Language	English