Operation Panel
4-2
Message Display
Messages indicating the status of the various printer operations are displayed on the message display.
Status Information
Error Codes
For information on error code and errors where the printer requires the operator's attention, refer to Error Messages on page
8-5.
Message Meaning
Please wait. The printer is warming up and is not ready.
When the printer is switched on for the first time, this message will take several minutes.
Please wait.
Loading paper.
The paper in the cassette is being moved to a position where paper feed is possible. This
message is sometimes displayed for a short period when the cassette is returned to its
original position, for example, after paper is added.
Note This message is not displayed on FS-2100D and FS-2100DN.
Please wait.
Adding toner...
Toner is currently being replenished. This message may be displayed during continuous
printing of a large volume of pages which require a large amount of toner such as with
photographs, etc.
Ready to print. The printer is ready to print.
Processing. The printer is receiving data to print. This is also shown when the printer is reading an SD/
SDHC memory card, USB memory, SSD or RAM disk.
Canceling... Jobs inside the printer are being canceled. To cancel a job, refer to Canceling a Printing
Job on page 4-4.
To Next Page
Loading...
Need help?
General
