Diagnostic aids 3-21
4024-XXX
Some menus are not available, depending on the configuration of the printer.
Maintenance page count (Maint Cnt Value)
The current value for the maintenance page counter is displayed. This counter tracks printer usage. A print job
containing a single page increments the counter by one and a duplex page by two. At 300,000, the customer is
reminded that the printer requires scheduled maintenance.This counter is reset by the servicer after a 80
Scheduled Maintenance message displays and a maintenance kit is installed. For further maintenance
information, see “Maintenance recommendations” on page 6-1.
To view the maintenance page count:
1. Select Maint Cnt Value from CONFIG MENU.
2. Press to view the value.
Press Back ( ) to return to the main Configuration menu.
Maintenance page counter reset (Reset Maint Cnt)
After scheduled maintenance, the servicer needs to reset the page counter.
To reset the maintenance page count to zero:
1. Select Reset Maint Cnt from CONFIG MENU.
The message Reset displays.
2. Press to confirm the selection.
Press Back ( ) to return to the main Configuration menu without resetting the page counter.
When the reset operation is complete, the menu returns to the Printer Setup Reset Maintenance Count
screen.
Tray Low Message See “Tray Low Message” on page 3-26
Exit Config Menu See “Exit Config Menu” on page 3-26
Configuration Menu (continued)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
