LS tractor MT5 Series User Manual

4 -6
Brake pedals
Clutch pedal
(2) Changing speed
 Depress the clutch pedal fully and operate all the
shift levers correctly.
 Before shifting F/R Shuttle lever, Range gear
lever, Creeper gear (if fitted), HAVE TO STOP
the tractor completely.
1. Press the clutch pedal and brake pedals at
the same time to stop the tractor. Turn OFF
the key switch.
2. DO NOT release clutch pedal until all
moving parts have been stopped.
(3) Emergency Stop
(4) Stopping tractor
3. Apply parking brake.
Shuttle lever
1. Press the clutch and brake pedals. Place
the shuttle lever, main gear shift lever in
NEUTRAL and PTO switch to OFF and
release the clutch pedal.
3. Apply parking brake and release the brake
pedals slowly.
2. Push the position control lever forward to
lower implements to the ground. Turn Key
switch to OFF position.
Caution
▶ DO NOT depart from the tractor with the transmission gear placed in NEUTRAL
and the parking brake is not applied. The tractor may roll.
Apply the parking brake at all times before leaving the tractor.
▶ Remove the ignition key always after stopping engine.
Throttle pedal
Range gear
shift lever
Parking brake lever
Main gear
shift lever
PTO gear lever
Main gear
shift lever
Throttle lever
Position control lever
Parking brake lever

LS tractor MT5 Series Specifications

General

Brand	LS tractor
Model	MT5 Series
Category	Tractor
Language	English