LS tractor MT5 Series User Manual

5 -7
5-6. Check before starting (Daily check)
Wheel bolts and
tightening of
each part
Brake, Clutch
pedal operation
Engine coolant
level
Damage of Headlights,
Turn signal lights,
Horn etc.
Fuel
level
Cleanness of
radiator screen
Engine oil
level
Operation
of Indicators
Tire air pressure
and damage
Condition of air
cleaner primary
element
(1) Engine oil
 Oil specification and capacity :
See chapter 5-3, “Lubricants and Capacity” or
the last page in this manual.
 Checking engine oil level
- Check engine oil level before starting engine or
at 5 minutes later after stopping engine.
- Check if the oil level is between MAX and MIN
mark of the oil gauge. If necessary, add new oil.
- It must only be checked while the engine is
stopped.
- If your engine is operated in dusty/dirty
condition, the service interval must be shorter
than normal condition.
- Must replace the engine oil and engine oil filter
after the first 50 hours of use.
Engine oil gauge
Engine oil gauge
 Before starting engine, check the followings carefully to avoid any failure or damage.
Transmission
oil level

LS tractor MT5 Series Specifications

General

Brand	LS tractor
Model	MT5 Series
Category	Tractor
Language	English