3 -24
Differential lock switch
Push the lower side of the switch or press down
the brake pedals once to release the differential
lock. If the traction of rear wheels is equalized,
the lock is released automatically.
If the differential lock does not released, i.e.
when turning to the right or left, the turning
radius is larger than normal operation, depress
the clutch pedal once and press one-side brake
pedal slightly for a second, and then the other.
▶Do not turn the tractor while the differential lock is engaged.
▶Do not use the differential lock while driving on the road.
▶Stop or slow the tractor before engaging the differential lock.
Warning
(11) PTO mode switch (optional)
It is used to select AUTO or MANUAL mode of
PTO operation
When the PTO mode switch is placed on ;
- MANUAL : PTO shaft will rotate independent
on the clutch pedal or position control lever.
- AUTO : If pressing clutch pedal or lifting rear
implement over the specified position, the PTO
shaft shall be stopped.
MHL
EHL
EHL
PTO mode witch
PTO mode witch
To Next Page
Loading...
Need help?
General
