LS tractor MT5 Series User Manual

3 -29
▶If the PTO gear lever is NOT engaged smoothly, lift up and down on implement to
align the drive shaft.
Caution
(3) PTO gear lever
 540 / 750 / 1000 rev/min and neutral position is
available.
 Before operating the lever, press the clutch
pedal and put PTO switch to OFF position, and
stop the PTO shaft completely.
Neutral
540rpm
750rpm
1000rpm
PTO lever
(2) Creeper gear lever (if fitted)
 If pulling this lever upward, the creeper gear is
connected (ON), and if pushing it downward, the
creeper gear is disengaged. (OFF)
▶As the driving force of the rear
axle is very high when working
in creeper speed range, the
machine may not stop even if
you press the brake pedals.
In this case, press the clutch
together.
Caution
Creeper gear
lever
Creeper range
Standard range
Release
Passenger’s seat
Passenger’s seat lever
(4) Passenger’s seat (if fitted)
 When using the seat, just lift the seat to the
locked position.
 When folding the seat, push the passenger’s
seat lever to the outside and fold it down.
Warning
▶ This passenger’s seat is an
application for training or
education about the tractor.
DO NOT ride people on the
seat while driving on road.

LS tractor MT5 Series Specifications

General

Brand	LS tractor
Model	MT5 Series
Category	Tractor
Language	English