3 -10
Shuttle lever
(6) Shuttle lever (Synchro shuttle)
This is used to select Forward or Reverse.
After depressing clutch pedal,
FORWARD : Push the lever forward.
REVERSE : Pull the lever backward.
Before reversing the tractor, lower the engine
speed and check the safety behind the tractor.
If shifting F/R shuttle lever forward or reverse
when the parking brake is engaged, the parking
brake indicator shall blink with alarming buzzer.
Before shifting the shuttle lever, HAVE TO
RELEASE the parking lever.
▶ The synchro-shuttle shift lever allows any forward range or reverse to be shifted
while the tractor is moving slowly. However, the clutch must be disengaged and the
engaged by means of clutch pedal. Make sure to depress clutch pedal fully and
release it gradually to take up load smoothly, but sudden gear shifting may cause
transmission damage. It is recommended to stop the tractor before operating the
shuttle lever.
Caution
Forward
Reverse
(7) Combination light switch
1
Turning ON/OFF the lights
- Instrument panel and all lights OFF
- Instrument panel and side lights ON
- Instrument panel, side lights and
headlights (Low beam) ON
▶ When passing with other vehicles in the opposite lane at night, turn the headlights
to low beam not to disturb oncoming cars.
Caution
To turn on/off the lights described as below, turn
the switch to the position where the related
symbol is marked.
Combination light switch
ON
To Next Page
Loading...
Need help?
General
