3 -23
(8) 4WD switch
Press the upper side of switch for Four wheel
drive.(4WD)
Press the switch lower side for 2WD.
Front wheel drive (4WD) is effective for the
followings.
-When traction is needed in plow ground.
-When working on slippery ground.
-When working with tiller on hard ground.
-When crossing a ridge
▶ When driving on public road, disengage the 4WD. If not, it may cause damage of
drive line and serious accident. After working, before coming out from the field,
select 2WD.
▶ When driving the tractor at high speed while the 4WD is engaged, sharp steering
may cause a accident.
Caution
4WD switch
(9) Parking brake lever
This lever is used to apply the parking brake.
Pull it upward with pressing the brake pedals
after locking brake pedals each other with brake
pedal connecting pin.
To disengage the parking brake, pressing the
brake pedals, and push the lever downward with
pressing the button of lever.
Parking brake lever
Park
(10) Differential lock switch
This is effective for working on slippery ground.
If the tractor cannot go forward as one side rear
wheel is slipping, depress the clutch pedal and
press the upper side of the differential lock
switch.
If engaged, both rear wheels will rotate at a
same speed and make it possible to move. But,
it disturbs steering operation. After escaping
from slippery ground, release the differential
lock.
Differential lock switch
MHL
To Next Page
Loading...
Need help?
General
