LS tractor MT5 Series User Manual

3 -47
Switch Function
Position control
lever
It is used to lift up/down the implement to the desired position.
Lower limit
setting knob
It is used to restrict the lower position of the position control lever.
One touch up/
down switch
It is used to lift up/down the implement without using position control lever.
Work mode
setting switch
It is used to select the Position/Draft/Depth control mode of the implement.
Auto lift mode
switch
It is used to select the function to lift the implement automatically when the
tractor turns or moves backward.
Draft/Depth
control setting
dial
It is used to set the ratio of towing force or tillage depth when working in the
Draft/Depth control mode.
Upper limit
setting dial
It is used to restrict the highest position of the implement when using auto
lift mode switch or one touch lift up/down switch.
Down speed
setting dial
It is used to set the lowering speed of the implement.
 Operation switch and dial description
3-6. Electro-Hydraulic Lift (EHL) (if fitted)
(1) Configuration & Description of the EHL Controller
Lower limit setting knob
One touch
up/down switch
Work mode
setting switch
Auto lift
mode switch
Down speed
setting dial
Draft/Depth control
setting dial
Upper limit
setting dial
Position control
lever
Leveling mode
switch (if fitted)
Slope setting
dial (if fitted)
Sensitivity
switch (if fitted)
Manual up/down
switch (if fitted)

LS tractor MT5 Series Specifications

General

Brand	LS tractor
Model	MT5 Series
Category	Tractor
Language	English