LS tractor XR4140 User Manual

3 -33
(1) Range gear shift lever
(Mechanical only)
 Four speed gear shift and neutral position is
available.
 Before operating the range gear shift lever, press
down the clutch pedal, brake pedals, and stop
the tractor completely.
Range gear
shift lever
3rd
2nd
Neutral
1st
4th
Mechanical
Notice
▶ Operate the range gear shift lever by correct “I” pattern. If operated diagonally, it
may cause a failure.
(2) PTO gear lever (if fitted)
 540 / 750 / 1000 rev/min and neutral position is
available.
 Before operating the PTO gear lever, depress
the clutch pedal and put PTO switch to OFF
position, and stop the PTO shaft completely.
 For further information about the PTO shaft, see
chapter 4-5-(2) in this manual.
PTO gear
lever
1000rpm
750rpm
540rpm
Neutral
Notice
▶ Operate the PTO gear lever by correct “I” pattern. If operated diagonally, it may
cause a failure.
▶If the PTO gear lever is not engaged smoothly, shift the lever again after lifting up
the implement from the ground to align the drive shaft.

LS tractor XR4140 Specifications

General

Brand	LS tractor
Model	XR4140
Category	Tractor
Language	English