2 -7
(4) Seat belt
Always wear the seat belt before operating the
tractor and adjust the belt to fit the operator.
1. Insert the seat belt end into the buckle until a
“click” indicates it is properly engaged.
2. To remove the seat belt from the buckle,
press the red release button on the buckle.
Check the seat belt regularly. If damaged or
frayed, replace it with a new one.
Warning
▶If not wearing the seat belt, it may cause serious injury in case of accident.
- During operation, it must be required to wear seat belt with a cab or safety frame
installed.
- After wearing the seat belt, adjust the belt to fit the operator.
▶If the roll-bar is folded down or removed, do not wear the seat belt.
Seat belt
Buckle
Seat belt
Buckle
ROLL-BAR
CABIN