LS tractor XR4140 User Manual

4 -2
(1) Engine start
Brake pedals
Clutch pedal
Main gear
shift lever
Key switch
4
2
3
1
N
Mechanical type
1. Sit in driver’s
seat and apply
parking brake
2. Place main gear shift, range gear
shift lever, shuttle lever in NEUTRAL
and PTO switch in “OFF” position.
PTO switch
OFF
7. Check if the battery charging
indicator and engine oil
pressure indicator are OFF
after starting engine.
If not, stop the engine
immediately and check the
problem.
3. Pull the throttle lever to
the low speed position.
6. Depress clutch pedal
fully and turn key switch
to “START” position. As
soon as the engine
starts, release the key
switch to “ON” position.
5. Wait until the cold start
aid indicator is OFF.
(about 10 seconds)
4. Turn key switch to “ON”
position and check if the
battery charging
indicator, engine oil
pressure indicator and
cold start aid indicator
are ON.
8. Run the engine for a
few minutes to allow
engine oil and
transmission oil to warm
up.
Caution
▶Check each part before starting
the engine.
▶Check if there is some other
people around before starting.
▶Place all the levers and
switches in NEUTRAL or OFF
position.
4-2. Engine Start and Stop

LS tractor XR4140 Specifications

General

Brand	LS tractor
Model	XR4140
Category	Tractor
Language	English