Makita DSP600ZJ User Manual

9 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DSP600 DSP601
Blade diameter 165 mm
Max. Cutting depth at 0° 56 mm
at 45° bevel 40 mm
at 48° bevel 38 mm
No load speed 2,500 - 6,300 min
-1
Overall length 346 mm
Rated voltage D.C. 36 V
Battery cartridge BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B, BL1860B
Charger DC18RC, DC18RD, DC18SD, DC18SE, DC18SF
Net weight 4.4 - 5.1 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
estcombination,accordingtoEPTA-Procedure01/2014,areshowninthetable.
Intended use
Thetoolisspeciallyintendedforperformingplunge
cuts.Thetoolisalsointendedforripandcrosscutsin
wood.Ifthetoolisequippedwithpropercircularsaw
blade,thetoolcanbeusedforsawingaluminum,plas-
tic, mineral contained plastic, and similar materials.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841:
Model DSP600
Soundpressurelevel(L
pA
):92dB(A)
Soundpowerlevel(L
WA
):103dB(A)
Uncertainty(K):3dB(A)
Model DSP601
Soundpressurelevel(L
pA
):92dB(A)
Soundpowerlevel(L
WA
):103dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
mined according to EN62841:
Model DSP600
Work mode: cutting wood
Vibrationemission(a
h,W
):2.5m/s
2
or less
Uncertainty(K):1.5m/s
2
Work mode: cutting metal
Vibrationemission(a
h,M
):2.5m/s
2
or less
Uncertainty(K):1.5m/s
2
Model DSP601
Work mode: cutting wood
Vibrationemission(a
h,W
):2.5m/s
2
or less
Uncertainty(K):1.5m/s
2
Work mode: cutting metal
Vibrationemission(a
h,M
):2.5m/s
2
or less
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationemissionvaluehas
been measured in accordance with the standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE:Thedeclaredvibrationemissionvalue
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING:Thevibrationemissionduringactual
useofthepowertoolcandifferfromthedeclared
emission value depending on the ways in which the
tool is used.
WARNING:Besuretoidentifysafetymeasures
to protect the operator that are based on an estima-
tionofexposureintheactualconditionsofuse(taking
accountofallpartsoftheoperatingcyclesuchas
thetimeswhenthetoolisswitchedoffandwhenitis
runningidleinadditiontothetriggertime).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.

Makita DSP600ZJ Specifications

General

Soft start	Yes
Product color	Black, Blue
Built-in light	-
Suitable for materials	Metal, Wood
Power protection features	Overload
Blade diameter	165 mm
Idle speed (max)	6300 RPM
Idle speed (min)	2500 RPM
Cutting depth (45º)	40 mm
Cutting depth (90º)	56 mm
Power source	Battery
Battery voltage	18 V

Weight and Dimensions

Width	346 mm
Weight	5100 g