Manitowoc Grove RT540E Service Maintenance Manual

ELECTRIC SYSTEM RT540E SERVICE MANUAL
3-14 Published 4-20-2015, Control # 502-01
4. Install nylon flat washer, leather washer, spacer, and nut
on motor shaft. Tighten nut.
5. Install wiper arm and blade on motor shaft.
6. Connect the electrical leads to the wiper motor as
marked before removal.
7. Turn the battery disconnect switch to the ON position.
Check
1. Operate the skylight wiper. Verify it works. (Replace
wiper blade as needed if it streaks or otherwise wipes
poorly.)
Reference Only

Manitowoc Grove RT540E Specifications

General

Brand	Manitowoc
Model	Grove RT540E
Category	Construction Equipment
Language	English