AJ0383DE ZP-AJ01E TRAX
7
1 INTRODUCTION
Applications
A wide range of voltage and current levels can be
achieved and measured with high precision which
allows the test system to be used for a wide range of
applications such as ratio, excitation current, winding
and contact resistance, impedance, tan delta/power
factor testing and various other measurements of
power system components.
▪ Examples are:
▪ Power transformer
▪ Current transformer
▪ Voltage transformer
▪ Resistance testing
▪ Primary injection testing
1.3 Warranty
Products supplied by Megger are warranted against
defects in material and workmanship for a period of
one year following shipment.
Our liability is specifically limited to replacing or
repairing, at our option, defective equipment.
This warranty does not include batteries, lamps or
other expendable items, where the original manufac-
turer’s warranty shall apply.
We make no other warranty. The warranty is void
in the event of negligence and / or abuse (failure to
follow recommended operating procedures) or failure
by the customer to perform specific maintenance as
indicated in this manual.
Receiving Instructions
▪ Check the equipment received against the packing
list to ensure that all materials are present. Notify
Megger of any shortage.
▪ Examine the instrument for damage occurred in
transit. If damage is identified, file a claim with the
carrier at once and notify Megger giving a detailed
description of the damage.
▪ The instrument has been thoroughly tested,
calibrated and inspected to meet rigid specifications
before being shipped. It is ready for use when set
up as indicated in this user manual.
Warranty repair
Equipment returned to the factory for repair must be
shipped prepaid and insured.
Contact your Megger representative for instructions
and a return authorization (RA) number.
Please indicate all pertinent information, including
problem symptoms.
Also specify the serial number and the catalog
number of the unit.
To Next Page
Loading...
Need help?
General
