3.1 Unpacking and inspecting the instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12
￭￭￭￭￭￭￭￭
912/913/914 Meter
3 Installation
3.1 Unpacking and inspecting the instrument
3.1.1 Packaging
The instrument is supplied in protective packaging together with the sepa-
rately packed accessories. Keep this packaging, as only this ensures safe
transportation of the instrument.
3.1.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
3.1.3 Application area
912/913/914 Meter instruments have been designed for mobile applica-
tion outdoors and/or in the laboratory.
CAUTION
Influence of weather conditions
Damage to instruments as a result of direct sunlight or temperatures
below the freezing point.
When you are not using the instrument, do not expose it to direct sun-
light or to temperatures below 0 °C.
3.2 Energy supply
The 912/913/914 Meter is equipped with a built-in rechargeable battery
which means it can be used for mobile applications. For stationary use in
the laboratory, the instrument can be operated with a power supply unit.
NOTICE
First charging of the instrument
The instrument must be fully charged prior to the initial start-up.
To Next Page
Loading...
Need help?
General
