Operation
32
Sequence of an automatic cooking
pr
ocess
Up until the start time the function,
the selec
ted temperature, Start at and
the start time will appear in the display.
After the programme has started you
can follow the heating-up phase in the
display until the r
equired temperature
has been reached.
As soon as this temperature is reached,
a buzz
er or melody will sound (see
"Settings - Acoustic Information").
After the heating-up phase you can
follow the time counting down in the
display
. The last minute counts down in
seconds.
Shortly before the end of the cooking
pr
ocess Steam reduction appears (only
with a temperature above approx.
80 °C).
At the end,
the steam generator and
light switch off. Prog. finished appears
and a buzzer or melody will sound (see
"Settings – Acoustic Information").
You have the option of saving the pro‐
gr
amme as a User programme (see
"User programmes") or increasing the
duration of the programme via .
Changing settings during a cooking
p
rocess
T
ouch .
The following will appear in the display:
– Temperature
– Duration
– Ready at
– Start at
If the temperature in the oven is too
high Ready at and Start at are not dis‐
played.
Changing the temperature
Scr
oll through the list until Tempera-
ture is highlighted.
Confirm with OK.
Cha
nge the temperature.
Confirm with OK.
The programme will restart with the
new t
emperature.
You can permanently reset the recom‐
mended t
emperature to suit your per‐
sonal cooking preferences. (See "Set‐
tings - Recommended temperatures").
To Next Page
Loading...
Need help?
General
