Technical Information
61
MasterChef Ovens
6.3 Programming Mode
Initial requirements:
1. Cancel/finish any programs that are running.
2. Switch off the appliance.
3. Close the door.
Accessing:
Note:
The access procedure must be completed within 10 seconds.
On double ovens, the programming mode is separate for each oven. Use
the appropriate On/Off pad to access programming mode for the desired
oven. The selected oven is indicated by the arrow in the display as follows:
upper oven; lower oven.
1. Touch and hold the Clear pad.
2. Touch the On/Off pad.
3. Release all pads.
4. Touch the Clear pad 4 times.
5. Touch the Clear pad a 5
th
time and hold it for 5 seconds.
Acknowledgment indicator:
The display shows the following programming options:
Touch More to access a second page with additional options.
Options:
1. Refer to Table 6-2.
2. Touch the pad next to the desired option.
3. If the desired option is not shown in the display, press More to advance to
the next menu.
4. Save a setting by touching the pad next to OK. The selected setting is saved
and the display reverts back to the options menu.
5. To quit without saving, touch the On/Off pad.
LANGUAGE OVEN LIGHT
CLOCK TEMPERATURE
TEMPERATURE More
Back RESET
TONE OPTIONS VERSION
DISPLAY 208V/240V* (or 208V/220V/240V)
*(H 4xxx series only)
To Next Page
Loading...
Need help?
General
