Mindray VS 8 User Manual

VS 8/VS 8A Vital Signs Monitor Operator’s Manual 11 - 3
2. Select the Save quick key to save the data.
NOTE
• The input information can be reviewed, printed or sent to other devices only
after being saved. If not saved, the information may be lost after a patient is
discharged or workflow is switched.
11.4 Changing the Display of Manual Parameters
To change the parameters to be displayed or their sequence in the list, follow this
procedure:
1. Select the Main Menu quick key → from the Configuration column select
Workflow → input the required password → select .
2. Select the on the right of the workflow to be set. Select an area and from the
popup list, select Manual Param.
3. Select Parameters Setup → Manual Input tab. Then select an item and from the
popup list, select the parameter to be displayed.
4. Return to the main screen and switch workflows for the setting to take effect.
11 - 4 VS 8/VS 8A Vital Signs Monitor Operator’s Manual
This page intentionally left blank.
To Purchase, Visit Avobus.com or call 1-800-674-3655

Mindray VS 8 Specifications

General

Brand	Mindray
Model	VS 8
Category	Monitor
Language	English