FX-2000 Series Installation and Operation Manual
5
Remote Annunciators
Batteries
FX-2000 Accessories
Model Description
RA-1000
Series
Remote multiplex annunciator panels. For Canada, ULC-S527-99
Standard requires a Common Alarm, Common Supervisory, and a
Common Ground Fault LED indicator on the Remote Annunciators.
To meet this requirement, use the FX-2000 Configurator to correlate
one LED for Common Alarm, one LED for Common Supervisory and
one LED for Common Ground Fault. The user can change the LED
assignments only if the LED Annunciator is connected to the RAX-
LCD and mounted on the same chassis.
RAM-208/216
Remote multiplex annunciator panels. For Canada, ULC-S527-99
Standard requires a Common Alarm, Common Supervisory, and a
Common Ground Fault LED indicator on the Remote Annunciators.
To meet this requirement, use the FX-2000 Configurator to correlate
one LED for Common Alarm, one LED for Common Supervisory and
one LED for Common Ground Fault. The user can change the LED
assignments only if the LED Annunciator is connected to the RAX-
LCD and mounted on the same chassis.
MGD-32,
AGD-048
Remote graphic annunciator drivers. The AGD-048 must be
installed in the same enclosure as the MGD-032.
RAX-LCD Remote Shared Display Annunciator
Model Description
Batteries 10 to 55 AH
Model Description
MP-300/R/S End-of-line Resistor Plate, R for red, S for stainless steel finish
RTI-1 Remote Trouble Indicator (ULC and ULI listed)
BC-160 External Battery Cabinet (ULC and ULI listed)
SYSTEM
RESET
FIRE
DRILL
ACKNOWLEDGE
GENERAL
ALARM
SIGNAL
SILENCE
BUZZER
SILENCE
AUXILIARY
DISCONNECT
LAMP
TEST
TEST/CONFIG
MODE
REMOTE
FAILURE
COMMON
TROUBLE
A.C. ON
ON DIP
1 2 3 4 5 6 7 8
ON DIP
1 2 3 4 5 6 7 8
A.C.
ON
COMMON
TROUBLE
SIGNAL
SILEBCE
BUZZER
SILEN CE
SIGNAL
SILEN CE
LAMP
TEST
SYSTEM
RESET
SWITCH
ENABLE
FIRE ALARM
ANNUNCIATOR
P1
P2
JW5
JW15
JW
2 3 4 9 10 11
JW
8 7 6 14 13 12
JW1
P3
P4
ALARM
QUEUE
SUPV.
QUEUE
TROUBLE
QUEUE
MONITOR
QUEUE
Mircom FX2000
Fire Alarm Control Panel
Normal Condition
February 14, 2001
SIGNAL
SILENCE
GENERAL
ALARM
ACKNOW-
LEDGE
FIRE
DRILL
SYSTEM
RESET
LAMP
TEST
ENTER
MENU
CANCEL
INFO
GROUND
FAULT
PRE-
ALARM
A.C.
ON
W = 7 1/8"
H = 6 1/2"
BA-110 BA-117
D = 4"
H = 3 3/4"
D = 3"
W = 5 15/16"
To Next Page
Loading...
Need help?
General
