Mircom FX-2000 User Manual

Appendix E: DIP Switch Settings Summary
72
Appendix E: DIP Switch Settings Summary
RA1000
ADDR SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8
33 ON OFF OFF OFF OFF
N/A N/A
ON when used with FX-2000 version 2.X.X or higher(16 bit checksum). OFF when used
with FX-2000 version 0.X.X(8 bit checksum). RAM-1000 must be at firmware revision
1.0.6 or higher to accommodate 16 bit checksum operation.
34 OFF ON OFF OFF OFF
35 ON ON OFF OFF OFF
36 OFF OFF ON OFF OFF
37 ON OFF ON OFF OFF
38 OFF ON ON OFF OFF
39 ON ON ON OFF OFF
40 OFF OFF OFF ON OFF
41 ON OFF OFF ON OFF
42 OFF ON OFF ON OFF
43 ON ON OFF ON OFF
44 OFF OFF ON ON OFF
45 ON OFF ON ON OFF
46OFFONONONOFF
47 ON ON ON ON OFF
48 OFF OFF OFF OFF ON
49 ON OFF OFF OFF ON
50 OFF ON OFF OFF ON
51 ON ON OFF OFF ON
52 OFF OFF ON OFF ON
53 ON OFF ON OFF ON
54 OFF ON ON OFF ON
55 ON ON ON OFF ON
56 OFF OFF OFF ON ON
57 ON OFF OFF ON ON
58 OFF ON OFF ON ON
59 ON ON OFF ON ON
60 OFF OFF ON ON ON
61 ON OFF ON ON ON
62OFFONONONON
63 ON ON ON ON ON
MGD-32 MGD-16/16
ADDR SW1-1 SW1-2 SW1-3
SW1-4
33 ON OFF OFF
ON when used with FX-2000 version 2.X.X
or higher(16 bit checksum). OFF when
used with FX-2000 version 0.X.X(8 bit
checksum). MGD must be 1.05 or higher to
accept 16 bit checksum.
34 OFF ON OFF
35 ON ON OFF
36 OFF OFF ON
37 ON OFF ON
38 OFF ON ON
39 ON ON ON

Mircom FX-2000 Specifications

General

Brand	Mircom
Model	FX-2000
Category	Control Panel
Language	English