Appendix B: Compatible Devices
62
FX-2000 Series Compatible Two-Wire Smoke Detectors (UL Listed)
Notes:
1. Whether mixing different models of compatible smoke detectors or using the same model on the
same circuit, total standby current of all detectors must not exceed 3 mA.
2. The below listed smoke detectors are compatible with initiating circuits having Compatibility
Identifier "A".
Smoke Detector
Make Model /
Base
Compatibility
Identifier
Head / Base
Rated
Standby
Current
Smoke Detector
Make Model /
Base
Compatibility
Identifier
Head / Base
Rated
Standby
Current
Hochiki Sentrol - ESL
DCD-135/NS6-220 HD-3/HB-72 0.035mA 429C S10A - N/A 0.10 mA
DCD-135/NS4-220 HD-3/HB-3 0.035mA 429CT S10A - N/A 0.10 mA
DCD-135/HSC-220R HD-3/HB-3 0.035mA 429CST S11A - N/A 0.10 mA
DCD-190/NS6-220 HD-3/HB-3 0.035mA 429CRT S11A - N/A 0.10 mA
DCD-190/NS4-220 HD-3/HB-3 0.035mA
711U/701E, 701U,
702E, 702U
S10A - S00 0.10 mA
DCD-190/HSC-220R HD-3/HB-3 0.035mA
712U / 701E, 701U,
702E, 702U
S10A - S00 0.10 mA
SIJ-24/NS6-220 HD-3/HB-72 0.040mA
713-5U / 701E,
701U, 702E, 702U
S10A - S00 0.10 mA
SIJ-24/NS4-220 HD-3/HB-3 0.040mA 721U / 702E, 702U S10A - S00 0.10 mA
SIJ-24/HSC-220R HD-3/HB-3 0.040mA
732U / 702E, 702U,
702RE, 702RU
S11A - S00 0.10 mA
SLR-24/NS6-220 HD-3/HB-72 0.045mA 721UT / 702E, 702U S10A - S00 0.10 mA
SLR-24/NS4-220 HD-3/HB-3 0.045mA 722U / 702E, 702U S10A - S00 0.10 mA
SLR-24/HSC-220R HD-3/HB-3 0.045mA
731U / 702E, 702U,
702RE, 702RU
S11A - S00 0.10 mA
SLR-24H/NS6-220 HD-3/HB-3 0.045mA 721UT / 702E, 702U S10A - S00 0.10 mA
SLR-24H/NS4-220 HD-3/HB-3 0.045mA 721UT / 702E, 702U S10A - S00 0.10 mA
SLR-24H/HSC-220R HD-3/HB-72 0.045mA
NAPCO
SLR-835/NS6-220 HD-3/HB-3 0.045mA FW-2 HD-6 55µA @ 24VDC
SLR-835/NS4-220 HD-3/HB-3 0.045mA
Detection Systems Inc.
SLR-835/HSC-220R HD-3/HB-72 0.045mA DS250 B - N/A 0.10 mA
SLR-835B-2 HD-6
55µa @
24VDC
DS250TH B - N/A 0.10 mA
DS282 B - N/A 0.10 mA
DS282TH B - N/A 0.10 mA
To Next Page
Loading...
Need help?
General
