78
WT07996X02
2-4. Notice
2-4-1. Error List
Click [Notice] in the menu, and then click [Error List] to access the Error List screen.
A list of units that are currently malfunctioning will appear.
Item Description
Controller Display target units can be narrowed down by selecting a centralized controller.
Reset All
Click to reset the errors at once.
Note: The units whose error has been reset will stop.
Note: Only the errors of the centralized controller selected in [Controller] will be reset.
Group name
The name of the group that the unit in error belongs to will appear.
Note: The group name will not be displayed if the unit in error is a unit such as an outdoor
unit or a system controller.
Unit address
The centralized controller No. and address of the unit in error will appear.
Note: For address display, refer to 4 “Name Display” in Chapter 1.
Error code
The error code that corresponds to the error will appear.
Click the error code to display the definition.
Reset
Click to reset each AHC error.
Group name
Unit address
Reset All
Click to reset all displayed
errors of the selected
centralized controller at
once.
Controller
Click to narrow down the
units in error to display into
centralized controller units.
Error code
Reset
Click to reset each AHC
error.
To Next Page
Loading...
Need help?
General
