79
WT07996X02
2-4-2. Unit error log
Click [Notice] in the menu, and then click [Unit error log] to access the Unit error log screen.
Note: The latest 64 unit errors will appear for each AE-200/AE-50/EW-50.
Note: Unit errors of all AE-200/AE-50/EW-50 controllers will appear in a list.
Item Description
Controller Display target error log can be narrowed down by selecting a centralized controller.
Clear log Click to clear the displayed unit error log of the centralized controller selected in [Controller].
Error code
The error code that corresponds to the error will appear.
Click the error code to display the definition.
Error source unit address
The centralized controller No. and address of the unit in error will appear.
Note: For address display, refer to 4 “Name Display” in Chapter 1.
Error detection unit address The address of the unit that detected the error will appear.
Error occurrence date and
time
The date and time when the error occurred will appear.
Error recovery date and time
The date and time when the error was resolved will appear.
Group name
Error source unit address
Clear log
Click to clear the displayed
error log of the selected
centralized controller.
Controller
Click to narrow down the
unit error log to display into
centralized controller units.
Error code
Error detection unit
address
Error occurrence date and
time
Error recovery date and
time
For building managers Chapter 2
To Next Page
Loading...
Need help?
General
