The “ ” mark (A) in the momentary fuel
gauge shows the average fuel consumption.
When the momentary fuel consumption sur-
passes the average fuel consumption, the mo-
mentary fuel consumption is displayed with a
green bar graph.
Be conscious that when maintaining the mo-
mentary fuel consumption above the average
fuel consumption, driving with better fuel
consumption can be possible.
NOTE
l
When the momentary fuel consumption can-
not be measured, the bar graph is not dis-
played.
l
The display setting can be changed to the
preferred units {km/L, mpg (US), mpg (UK)
or L/100 km}.
Refer to “Changing the function settings” on
page 5-14.
l
It is possible to cancel the green bar graph.
Refer to “Changing the function settings” on
page 5-14.
AS&G monitor*
E00531100016
The accumulated time the engine has been
stopped by Auto Stop & Go (AS&G) system
is displayed.
“Auto Stop & Go (AS&G) system” on page
6-28
NOTE
l
When the ignition switch or the operation
mode is ON again, the accumulated time
will be reset.
ECO indicator*
E00529300200
This indicator will be dis-
played when fuel-efficient
driving is achieved.
ECO Drive Assist
E00531501088
This function displays how fuel-efficiently
you are driving under different driving condi-
tions.
The ECO drive assist display will change as
follows if you do fuel-efficient driving using
the accelerator in a way well matched with
the vehicle speed.
NOTE
l
On vehicles with A/T or CVT, the ECO
drive assist is displayed only when vehicle is
driven with the selector lever in the “D”
(DRIVE) position or when vehicle is driven
in the sport mode (for vehicles equipped
with shift paddles).
ECO Score
E00531601063
ECO score indicates the points you have
scored on fuel-efficient driving by the num-
ber of leaves as follows:
[When the ignition switch or the operation
mode is ON]
Multi information display - Type 1
5-13
OGFE16E1
Instruments and controls
5
To Next Page
Loading...
Need help?
General
