Mitsubishi Outlander 2015 User Manual

Brake pedal
While driving at the set speed, use the brake
pedal, which disengages the cruise control,
then push down the SET - switch (B) and re-
lease the switch momentarily to set a new de-
sired cruising speed.
To temporarily increase or de-
crease the speed
E00609600194
To temporarily increase the
speed
Depress the accelerator pedal as you would
normally. When you release the pedal, you
will return to your set speed.
NOTE
l
In some driving conditions, the set speed
driving may be deactivated. If this happens,
refer to “To activate” on page 6-70 and re-
peat the speed setting procedure.
To temporarily decrease the
speed
Depress the brake pedal to decrease the
speed. To return to the previously set speed,
push up the RES + switch (C).
Refer to “To resume the set speed” on page
6-73.
To deactivate
E00609702450
The set speed driving can be deactivated as
follows:
l
Press the CRUISE CONTROL ON/OFF
switch (A) (Cruise control will be turned
off.)
l
Press the CANCEL switch (D).
Cruise control*
6-72
OGFE16E1
Starting and driving
6

Mitsubishi Outlander 2015 Specifications

General

Brand	Mitsubishi
Model	Outlander 2015
Category	Automobile
Language	English