Mitsubishi Outlander 2015 User Manual

5. Make sure the seat belt’s buckle is on
the seat cushion.
Folding the third seats (7 per-
sons)
E00403600060
To fold
1. Lower the head restraints of the third
seat to the lowest position. (Refer to
“Head restraints” on page 4-06.)
2. Pull up the strap (A), then fold the seat-
back forward.
To return
1. Pull the strap (A), then raise the seatback
until it locks securely into place.
Push lightly on the seatback to confirm
that it has actually been secured.
Making a flat seat
E00404300846
By removing the head restraints and fully re-
clining the seatbacks of the seats, one large
flat seat is achieved.
WARNING
l
Never drive with passengers on the flat
seat. This is highly dangerous.
CAUTION
l
To make a flat seat, stop the vehicle in a safe
place.
CAUTION
l
Make sure the seat is adjusted by an adult or
with adult supervision for correct and safe
operation.
l
Do not walk around on top of the seats after
they have been laid flat.
l
To ensure the seats are locked securely, at-
tempt to move them back and forth.
l
Do not jump on, or impact the seatbacks
heavily.
l
To raise the seatback, put a hand on the seat-
back and raise slowly. Never have a child do
this operation, or an unexpected accident
may result.
1. Remove the head restraints from the
front seats, raise the armrest and remove
the cargo area cover (if so equipped).
(Refer to “Head restraints” on page 4-06,
“Armrest” on page 4-05 and “Cargo area
cover” on page 7-81)
Making a flat seat
4-10
OGFE16E1
Seats and seat belts
4

Mitsubishi Outlander 2015 Specifications

General

Brand	Mitsubishi
Model	Outlander 2015
Category	Automobile
Language	English