NOTE
l
Since the air conditioning operation is con-
trolled while the ECO mode is operating,
you may feel that effectiveness of the air
conditioner is weak.
→“ECO mode switch” on page 5-62
l
Even if the ECO mode is operating, you can
select normal operation of the air condition-
er.
On vehicles equipped with MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to change the
setting. Refer to the separate owner’s man-
ual for details.
l
In extreme cold, the air conditioning control
panel screen may operate sluggishly. This
does not indicate a problem.
It will disappear when the vehicle interior
temperature rises to a normal temperature.
Blower speed selection switch
E00702801443
Press of the blower speed selection
switch to increase the blower speed.
Press
of the blower speed selection
switch to decrease the blower speed.
The selected blower speed will be shown in
the display (A).
1- Increase
2- Decrease
Temperature control switch
E00703001703
Press or of the temperature control
switch to the desired temperature.
The selected temperature will be shown in
the display (A).
NOTE
l
The temperature value of air conditioner is
switched in conjunction with outside tem-
perature display unit of the multi informa-
tion display.
On vehicles equipped with multi information
display - Type 1, refer to “Changing the
temperature unit” on page 5-16.
On vehicles equipped with multi information
display - Type 2, refer to “Changing the
temperature unit” on page 5-16.
Automatic climate control air conditioner
7-06
OGFE16E1
For pleasant driving
7
To Next Page
Loading...
Need help?
General
