Mitsubishi Outlander 2015 User Manual

Installing a child restraint sys-
tem to the lower anchorage
(ISOFIX child restraint mount-
ings) and tether anchorage
E00406901999
Lower anchorage location
Your vehicle’s second seat is fitted with low-
er anchorages for attaching a child restraint
system with ISOFIX mountings.
AA0111504
Tether anchorage location
There are 2 child restraint anchorage points
located on the back of the second seatbacks.
These are for securing a child restraint sys-
tem tether strap to each of the 2 rear seating
positions in your vehicle.
WARNING
l
Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehi-
cle.
Child restraint system with
ISOFIX mountings
The child restraint system is designed only
for seats that incorporate lower anchorages.
Retain the child restraint system using the
lower anchorages.
It is not necessary to retain the child restraint
system using the vehicle’s seat belts.
A- Child restraint system connectors
To install
1. Remove any foreign material in or
around the connectors and ensure the ve-
hicle seat belt is in its normal storage po-
sition.
2. Remove the head restraint from the loca-
tion in which you wish to install a child
restraint. Refer to “Head restraints” on
page 4-06.
Child restraint
4-24
OGFE16E1
Seats and seat belts
4

Mitsubishi Outlander 2015 Specifications

General

Brand	Mitsubishi
Model	Outlander 2015
Category	Automobile
Language	English