Mitsubishi Outlander 2015 User Manual

NOTE
l
When starting the engine, the selector lever
is in a position other than the “P” (PARK) or
the “N” (NEUTRAL) position, or you press-
ed the engine switch without depressing the
brake pedal, warning display will appear
(A/T).
Warning display (colour liquid crystal dis-
play)
Stopping the engine
E00620800232
[Except for vehicles equipped with keyless
operation system]
1. Bring the vehicle to a complete stop.
2. Fully engage the parking brake while de-
pressing the brake pedal.
3. For vehicles equipped with M/T, turn the
ignition switch to the “LOCK” position
to stop the engine, and then move the
gearshift lever to the 1
st
(on a uphill) or
“R” (Reverse) (on a downhill) position.
For vehicles equipped with A/T, CVT,
place the selector lever in the “P”
(PARK) position, and stop the engine.
[For vehicles equipped with keyless opera-
tion system]
WARNING
l
Do not operate the engine switch while
driving except in an emergency. If the en-
gine is stopped while driving, the brake
servomechanism will cease to function
and braking efficiency will deteriorate.
Also, the power steering system will not
function and it will require greater man-
ual effort to operate the steering. This
could result in a serious accident.
NOTE
l
If you have to bring the engine to an emer-
gency stop while driving, press and hold the
engine switch for 3 seconds or more, or
press it quickly 3 times or more. The engine
will stop and the operation mode will go to
ACC.
l
Do not stop the engine with the selector lev-
er in any position other than the “P” (PARK)
position (A/T, CVT). If the engine is stop-
ped with the selector lever in any position
other than the “P” (PARK) position, the op-
eration mode will go to ACC rather than
OFF.
Put the operation mode in OFF after placing
the selector lever in the “P” (PARK) posi-
tion.
1. Stop the vehicle.
2. Fully engage the parking brake while de-
pressing the brake pedal.
3. On vehicles with M/T, press the engine
switch to stop the engine, move the gear-
shift lever to the 1
st
(on a uphill) or “R”
(Reverse) (on a downhill) position.
On vehicles with A/T, CVT, move the
selector lever to the “P” (PARK) posi-
tion, press the engine switch to stop the
engine.
NOTE
l
For diesel-powered vehicles, if the tempera-
ture inside the engine compartment is high,
the cooling fans (A) will continue to operate
for some time even if the engine is stopped.
Therefore, the operation sound of the cool-
ing fans may be heard even after the engine
is stopped. This sound is normal and does
not indicate a malfunction.
After operating for a period of time, the
cooling fans will stop automatically.
Starting and stopping the engine
6-24
OGFE16E1
Starting and driving
6

Mitsubishi Outlander 2015 Specifications

General

Brand	Mitsubishi
Model	Outlander 2015
Category	Automobile
Language	English